Vacuum drying oven SNVS-215/5-RT-N

Application and Purpose in Laboratory and Production of SNVS-215/5-RT-N

The SNVS-215/5-RT-N vacuum drying oven is a modern piece of equipment that allows for thermal processing of materials at temperatures up to 500 degrees in a vacuum or with air access. The oven has a volume of 215 liters and manual vacuum adjustment, which is carried out using special valves. Thanks to modern temperature control, the oven demonstrates excellent thermal processing performance.

SNVS-215/5-RT-N complies with Russian standards and has certificates of inclusion in the State Register of Measuring Instruments. It is ideally suited for use in production and clean laboratories. The oven can be supplemented with a programmable control device with an automatic timer and a wide selection of additional options.

The heating chamber power ranges from 1 to 4 kW, allowing for efficient thermal processing of materials. The equipment operates at a mains voltage of 220 V and a frequency of 50 Hz. In the basic configuration, the oven is equipped with an Autonics TC4 temperature controller with an automatic temperature control range from 40 to 500 degrees Celsius. The accuracy of automatic temperature maintenance ranges from ±3 to ±0.0015t.

The residual pressure in the working chamber of the oven is 1.33x10³ Pa (10 mm Hg) and can optionally be increased to 0.067 Pa (5x10⁻⁴ mm Hg). In the basic configuration, the oven is equipped with a VPA-3S pump and a connecting hose 1000 mm long. The maximum allowable amount of moisture in the oven volume is no more than 10 ml.

The warm-up time of the oven to the nominal operating temperature is from 40 minutes. The flange is cooled by a forced liquid method. The pressure of the working cooling liquid medium is not less than 0.1 MPa and not more than 0.35 MPa, and the minimum allowable flow rate of the cooling liquid is 1.5 l/min. A fitting with a diameter of 10 mm is used to connect the cooling liquid.

The oven in its standard configuration has a high load capacity, as the permissible load on the shelf is 10 kg (distributed over the area). The working space of the oven has a diameter and depth of 650 mm each, and the overall dimensions of the oven are 954 mm in width, 1365 mm in depth, and 1417 mm in height. The weight of the oven is 360 kg.

The SNVS-215/5-RT-N vacuum drying oven is a reliable and efficient piece of equipment for thermal processing of materials in a vacuum or with air access. It is ideally suited for use in production and laboratories where precise temperature control and minimization of external factors on the thermal processing process are required. Thanks to modern temperature control and manual vacuum adjustment, the oven ensures excellent thermal processing performance.

The SNVS-215/5-RT-N vacuum drying oven can be supplemented with a programmable control device with an automatic timer and a wide selection of additional options.

Additional options available for this oven may include:

• An autonomous thermostat, in the absence of the possibility of connecting to a centralized equipment cooling system;
• Increased accuracy of automatic temperature maintenance;
• Increased residual pressure in the working chamber up to 0.067 Pa (5x10-4 mm Hg);
• A different type of pump to improve air evacuation efficiency and reduce the time to reach the set vacuum;
• A diaphragm pump for clean rooms;
• A wide selection of connecting hose options for the pump;
• An additional shelf or basket to increase the working chamber volume and convenience of sample placement;
• A built-in humidity sensor to control the humidity level inside the working chamber;
• Programmable operating modes for automatic execution of specified drying cycles;
• A built-in interface for monitoring and controlling the drying process via a computer or smartphone.

Specific options and their availability may vary depending on the manufacturer and model of the vacuum drying oven. It is recommended to refer to the operating instructions or contact the manufacturer to obtain detailed information about the available options for a specific model.

The measurement system complies with Russian standards and has certificates of inclusion in the State Register of Measuring Instruments, which confirms the high quality and safety of the equipment.

The SNVS-215/5-RT-N vacuum oven is a reliable and efficient tool for thermal processing of materials. It has high accuracy of temperature control, which ensures excellent thermal processing performance and allows achieving high quality and precision in the work result. In addition, the chamber has a high load capacity, allowing for processing large volumes of materials, making it an indispensable tool in production and laboratory settings.

If you need to perform thermal processing of materials in a vacuum or with air access, the SNVS-215/5-RT-N vacuum drying oven is an ideal choice. It ensures high quality and precision of work, as well as safety and reliability in operation. You can supplement the oven with a programmable control device and select additional options according to your needs.

You can order the SNVS-215/5-RT-N vacuum drying oven right now and ensure high-quality thermal processing of materials.